IEC POWER CORD CONNECTION (2)
is receptacle is for the IEC line cord (supplied) that provides AC power to the unit. It is very important
that you ensure the PVX™p 10 Bluetooth® has the proper AC line voltage supplied. You can nd the proper
voltage for your PVX™p 10 Bluetooth® printed next to the IEC line (power) cord on the rear panel of the unit.
Please read this guide carefully to ensure your personal safety as well as the safety of your equipment. Never
break o the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a
ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To
prevent the risk of shock or re hazard, always be sure that the mixer and all other associated equipment are
properly grounded.
ONOFF SWITCH 3
This rocker switch supplies AC power to the PVX™p 10 Bluetooth® when switched to the ON position. The ON
position is with the top side of the switch pushed “in” or nearly flush with the rear panel.
To Next Page
Loading...
Need help?
General
