Peavey VIP 1 User Manual


1. To access the System Menu, press and hold the tuner button (Fig 5). The screen will display 3 choices
in this menu: ADJUST CONTRAST (for changing the contrast of the display), DISABLE DEMO MODE (turns
off the “light show”) and FACTORY RESET (erases all user defined presets and returns the amp to original
factory presets. To disable DEMO MODE, use the inst/stomp encoder to scroll until the display reads
DISABLE DEMO MODE and press the amplifiers encoder to select.



2. To adjust the contrast, press the amplifier encoder, then use the inst/stomp encoder (Fig 6) to adjust
the contrast. Then, press the amplifiers encoder to save your changes or the effects encoder to exit
without saving changes (Fig 7).
Fig 5
Fig 6
Fig 7

Peavey VIP 1 Specifications

General

Power Output	20 Watts
USB Interface	Yes
USB	1 x Type B
Footswitch Included	No
Speaker	1 x 8" Custom Voiced Speaker
Channels	2
Type	Modeling Combo Amplifier
Inputs	1 x 1/4" Instrument, 1 x 1/8" Aux
Outputs	1 x 1/8" Headphones
Footswitch I/O	1 x 1/4" (Footswitch)
Effects	Reverb, Delay, Chorus, Flanger, Octaver, Tremolo