One of the most unique features of the VYPYR
®
amplifier is the channel select encoder. Each of the amp
modes contain three channel models, low gain, medium gain, and high gain. Turn the encoder to select the
amplifier model you desire. To change the channel model, simply press the Amp encoder.
When modeling the amplifiers for the VYPYR we also painstakingly modeled the EQ and how the EQ
controls functioned on the various amplifiers. For instance the XXX, has active EQ on the lead channel. You
will notice when you are on the Red channel model of the XXX the EQ will act very differently from that of
a Green channel Twn. Some EQs will have drastic effects and some, like the British amplifier we modeled,
will have little effect at all.
The classic sound of Queen and so many British bands from the 60’s through today. The tone
stack on Brian May’s amplifier was shorted, so on this model the tone controls have limited response.
Modern take on a classic British stack. This very versatile amplifier can go from nice ‘n clean
to modern hot rodded tones.
The Peavey Classic 50 is one of the most successful amps of all time. With its responsive gain
structure and warm/punchy tone. Classic
Series guitar amps are revered by gritty blues benders, chicken
pickin’ country cats and nouveau-Stones rockers alike.
The Peavey XXX is an extremely versatile amplifier. With an ultra-clean clean channel, a modified
British rhythm channel and lead channel with over-the-top gain for screamin’ leads, the XXX may become
your favorite amp.
The legendary sound of the 6505+ head, but with an EL34 power section for a bit of British flair.
The EL34’s add a “bark” to the midrange that has become a favorite for many of Peavey’s artists.
To Next Page
Loading...
