Quick Start
1 2 3 4
5 6
7
8
9
10
11 12
13 14
15 16
170
11 - Power Sponge
™
Found on the VYPYR 75 and 100 only
Master Volume control. Power Sponge adjusts the amount of power the amp is capable of producing.
This patented circuit allows you to get that full-on cranked sound at bedroom levels.
12 - Power
Turn it on! Since VYPYRs have such advanced processing, they require a few moments to boot up.
-
tion of a Standby switch. This switch allows time to warm up the tubes. Tubes need to be hot in order
to produce the desired power and tone. We suggest you allow at least three minutes before turning the
standby switch on.
13 - Bank and Preset Select
Your VYPYR comes equipped with 12 factory presets. These presets are in groups of 4 and savable
which Bank of four you are currently on. Select which preset you’d like to hear by pressing one of the
just like a car radio. Your tone is saved.
14 - Tap Tempo
enter .
of the primary mains. Hazardous energy can be present inside the
chassis when the on/off switch is in the OFF position.
To Next Page
Loading...
