47
WARRANTY
Before installation and use of the product, read this manual completely and thoroughly. Installation and
maintenance must be carried out by qualified staff, responsible for performing the hydraulic and electric
connections according to the applicable Standards in force.
The manufacturer declines all responsibility for damage deriving from improper use of the product and is not
liable for damage caused by maintenance or repairs that are carried out by unqualified staff and/or using non-
original spare parts. The use of non-original spare parts, tampering or improper use making the warranty null
and void.
DISPOSAL
For the disposal of DGBOX components, follow the Standards and Laws in force in the countries
where the unit is used.
Do not disperse pollutant parts in the environment
DECLARATION OF CONFORMITY
We declare, under our own responsibility, that the product in question is in compliance with the
following European Directives and national implementation provisions.
2014/35/EU Low Voltage Directive
2011/65/EU Dangerous substances in electronic appliances (RoHS)
2012/19/EU and 2003/108/ CEE Dangerous substances in electronic appliances (WEEE)
2014/30/EU Electromagnetic Compatibility Directive (EMC)
Bigarello, 20/03/2017 DGFLOW S.r.l.
Stefano Concini
We declare, under our own responsibility, that the product in question is in compliance with
the following European Directives and national implementation provisions.
2014/35/EU Low Voltage Directive
2011/65/EU Dangerous substances in electronic appliances (RoHS)
2012/19/EU and 2003/108/ CEE Dangerous substances in electronic appliances (WEEE)
2014/30/EU Electromagnetic Compatibility Directive (EMC)
UK legislation:
2016 No. 1101, 2012 No. 3032, 2016 No. 1091
San Bonifacio, 01/07/2021 Pedrollo S.p.A.
Il Presidente
Silvano Pedrollo
To Next Page
Loading...
General