3. To undo the chest harness, press the red
button and pull the latches up.
4. To undo the chest clip, press the buttons on
the side of the clip and pull apart as shown.
5. Adjust the chest clip to the arm pit level.
To tighten the harness, pull the adjuster
strap at the bottom of seat. Make sure
you leave one nger width between the
harness and your baby’s collar bone. Tuck
the loose end of the adjuster strap under
the seat padding.
6. To loosen the chest harness, press the
button inside the slot located at your
baby’s feet, and pull the top harness
as shown.
How to Buckle Your Baby into the Car Seat Continued
To Next Page
Loading...
