15
Important! Not all seat belts work the
same way. To make sure the infant car seat
is properly installed using your seat belts,
read your vehicle owner’s manual. It will
suggest proper placement of an infant car
seat in your particular vehicle.
1. Park your vehicle on level ground. Take
the car seat off the base. To do this,
squeeze together the two handles on the
back of the seat and lift.
2. Position the base rear facing in the back
seat of your vehicle. Thread the lap belt
through the slots on the base and lock the
latch plate into the buckle as shown.
How to Install the Base Using Your Vehicle Seat Belts
To Next Page
Loading...
