To Wash the Chair Padding:
1. Remove the hood, head protection, and
shoulder strap covers.
2. Unfasten and remove the harness from
the seat. To do this, unhook the harness
straps from the slide adjuster. Pull up on
the anchor buckles located on each side of
the slide adjuster. Push them through the
slots. Flip the seat back over and pull the
straps through the seat and padding. Push
the harness buckle through the padding.
3. Once all straps are free from padding,
undo the aps that hold the padding on
the seat as shown and pull it off the seat.
Do not remove the inside padding.
Cleaning and Maintenance Continued
To Next Page
Loading...
