37
3. Check that there is green
in both indicator windows.
Green (a) means the rigid
LATCH connectors are
securely connected to the
vehicle’s lower anchors.
Red (b) means the booster
is not connected to the
vehicle’s lower anchors.
4. Pull the yellow handle
at the front of the booster
(a) again. At the same time,
push the booster against
the back of the vehicle seat
(b). Make sure the booster
touches the back of the
vehicle seat.
BACKLESS MODE: SECURING THIS BOOSTER
WITH RIGID LATCH IN THE VEHICLE
To Next Page
Loading...
