38
5. To disconnect the
booster seat squeeze the
yellow handle at the front
of the booster (1) and pull
the booster seat towards
you until the yellow release
buttons on the side of the
base are fully revealed.
Pull both yellow release
buttons at the same time
(2) until you hear the rigid
LATCH connectors open.
Now, you can remove the
booster seat.
6. To store the rigid LATCH
connectors inside the
booster seat, squeeze the
yellow handle and at the
same time push the yellow
rigid LATCH connectors
into the booster until they
disappear.
1
2
2
1
BACKLESS MODE: SECURING THIS BOOSTER
WITH RIGID LATCH IN THE VEHICLE
To Next Page
Loading...
