39
IMPORTANT: Make sure the booster is properly
positioned in the vehicle. The booster must touch the
back of the vehicle seat.
Make sure the booster does not sit on top of the seat
belt hardware or webbing for its seat or a neighboring
seat. If the booster sits on top of the hardware or
webbing, stop using the rigid LATCH and reposition
the booster seat. If it still sits on top of the hardware
or webbing, move the booster to a dierent seating
position. If you need further help, check your vehicle
owner’s manual and/or contact Peg-Perego Customer
Service at 1-800-671-1701.
BACKLESS MODE: SECURING THIS BOOSTER
WITH RIGID LATCH IN THE VEHICLE
To Next Page
Loading...
