Peg-Perego Viaggio1 Duo-Fix ASIP - Serial Numbers; Product Cleaning

26
them away from the front;
28•release,fromtheback,theshoulderpadsandpullthem
away from the safety harness from the front;
29•sliptheheadrestofffromthetop;
30•unfasten,fromunderneaththeframe,thebuckleoftheleg
dividerstrap(fig.a)andextractthestrapfromthepadof
thelegdivider(fig.b);
31•pulltheliningupwardstoremoveit,checkingthatthe
strap goes through the opening.
 Maintenanceofthepadding
Brush the fabric parts to remove dust.
 • Machinewashatamaximumof30°Cwithadelicatewash
setting and short spin cycle.
 • Donotusechlorinebleach.
 • Donotiron.
 • Donotdryclean.
Do not remove stains with solvents.
 • Donottumbledry.
30
°
Howtoreplacetheliningonthe
Viaggio1Duo-FixASIPcarseat
ToreplacetheliningoftheViaggio1Duo-FixASIPcarseat:
32•insertthesafetyharnessfromunderneaththeframeand
thread them through the openings at the base of the seat.
Insert the strap in the lining of the leg divider;
33•attachittotheopeningintheframe
34•attachthestriptotheattachmentpointofthelegdivider
strap
35•threadtheliningstartingfromtheseatandmoving
upwards, paying attention to the shape of the backrest.
36•Threadtheheadrest–makesuretheredstripispassed
through the opening in the fabric.
 • Threadtheshoulderstrapsinthesafetyharness.
37•Insertthesafetystrapsintheseatinthisorder:beginwith
the buckle of the shoulder straps and then deal with the
straps.
38•extendthestrapsandinsertthemintheseat’sframe(the
straps in the upper hole, the buckle in the lower one).
39•fastenthemproperlyintheback,asshowninthepicture.
 • fastenthesafetyharnessstraps(point17)
IMPORTANT:thestrapsmustnotbetwistedaround.
40•fastenthemtothebackattachmentpoint,threadingthem
behind the instructions tray.
 • applytheboosterseatifthebabyisstillsmall.
Serial numbers
41•Thenameoftheproduct,productiondateandserial
number of the Viaggio1 Duo-Fix ASIP can be found under
the seat.
42•TheapprovallabeloftheViaggio1 Duo-Fix ASIP is behind
the backrest.
43•Productiondateofthestrap.
Thisinformationisrequiredforanycomplaints.
Product cleaning
• Thisproductrequiresasmallamountofmaintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protecttheproductfromatmosphericagents:humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
How to read the approval label
 • Thisparagraphexplainshowtointerprettheapprovallabel
(orangelabel).
 • Thelabelisdoublebecausethiscarseatisapprovedfor
twotypesofinstallationincars:
 • ISOFIXattachmentsystems(thetermSEMI-UNIVERSAL
class A indicates compatibility of the car seat with vehicles
fitted with this system).