Pegatron M2N-VM/S - Page 54

2-8 Chapter 2: BIOS setup
Recovering the BIOS from a CD
To recover the BIOS from a CD:
1. Remove any oppy disk from the oppy disk drive, then turn on the system.
2. Insert the CD with the original or updated BIOS le to the optical drive.
3. The utility displays the following message and automatically checks the
oppy disk for the original or updated BIOS le.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading le “M2N-VMS.ROM”. Completed.
Start ashing...
When no oppy disk is found, the utility automatically checks the optical drive
for the original or updated BIOS le. The utility then updates the corrupted
BIOS le.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
4. Restart the system after the utility completes the updating process.
The recovered BIOS may not be the latest BIOS version for this motherboard.
Get the latest BIOS le from Pegatron.