Pegatron M2N-VM/S - Hyper Transport Configuration

2-26 Chapter 2: BIOS setup
Hyper Transport Conguration
Hyper Transport Conguration
SB to K8(CPU) Freq Auto [Disabled]
SB to K8(CPU) Frequency [1000 MHz]
SB to K8(CPU) LinkWidth [16 16 ]
SouthBridge to K8(CPU)
frequency selection
by CPU capability
SB to K8(CPU) Frequency [1000 MHz]
Allows you to select southbridge to K8(CPU) frequency. Conguration options:
[200 MHz] [400 MHz] [600 MHz] [800 MHz] [1000 MHz] [1200 MHz] [1400 MHz]
[1600 MHz] [1800 MHz] [2000 MHz] [2200 MHz] [2400 MHz] [2600 MHz]
SB to K8(CPU) LinkWidth [16 16 ]
Allows you to select southbridge to K8(CPU) link width.
Conguration options: [4 4 ] [8 8 ] [16 16 ]
SB to K8(CPU) Freq Auto [Disabled]
Allows you to enable or disable southbridge to K8(CPU) frequency selection by
CPU capability. Conguration options: [Enabled] [Disabled]
The following item appears only when the SB to K8(CPU) Freq Auto item is set
to [Disabled].