Pelgrim GVWC270L User Manual (English)

Other manuals for Pelgrim GVWC270L

Questions and Answers:

D
Denise AtkinsAug 29, 2025
Why does my Pelgrim GVWC270L have spots on stainless steel or silver?
- D
  Dawn PaceAug 30, 2025
  Spots on stainless steel can be caused by some foodstuffs, such as mustard, mayonnaise, lemon, vinegar, salt and dressings, if left for too long. Rinse off these types of foodstuffs if not starting the dishwasher immediately. Consider using 1h 65° with the Speed wash option. All stainless steel can cause spots on silver if they come into contact during dishwashing. Aluminium can also cause spots on dishes. Separate dishes made from different metals, such as silver, stainless steel and aluminium, to avoid marks and tarnishing.
T
Tyler WilsonAug 30, 2025
Why does my Pelgrim GVWC270L have spots or films on the dishes?
- M
  Mary MillerAug 30, 2025
  Spots or films on dishes in your Pelgrim dishwasher can be due to an incorrect rinse aid dosage setting. Check the rinse aid dosage setting. If the TAB setting is activated and you are using all-in-one detergent with insufficient drying effect, switch to separate detergents or deactivate the TAB setting and top up with salt and separate rinse aid. Also, check if the salt compartment is empty and top up with salt if needed. Finally, verify that the water softener setting is correct.
S
stevenskelliAug 30, 2025
What to do if detergent residue remains in the detergent compartment of my Pelgrim Dishwasher?
- J
  Jack OnealAug 31, 2025
  If there's detergent residue in the detergent compartment of your Pelgrim dishwasher after washing, ensure that the detergent compartment was dry when you added the detergent. Also, check that the dishes are not preventing the detergent compartment from opening.
R
robert30Aug 31, 2025
Why does my Pelgrim Dishwasher make a rattling sound?
- T
  Tyler MorrisAug 31, 2025
  A rattling sound during dishwashing in your Pelgrim dishwasher indicates that the dishes are not correctly placed or the spray arms are not rotating. Check that the dishes are placed securely and spin the spray arms to make sure they can rotate freely.
B
Brandi HillSep 1, 2025
Why does my Pelgrim GVWC270L Dishwasher have a sticky white/blue film on the dishes?
- K
  Kathleen WhiteSep 1, 2025
  A sticky white/blue film on the dishes from your Pelgrim dishwasher usually means the rinse aid dosage setting is too high. Reduce the dosage. If you have very soft water, you may want to dilute the rinse aid 50:50 with water.
L
Luke HansenSep 1, 2025
Why does my Pelgrim GVWC270L have spots left after washing?
- J
  Jesus CookSep 1, 2025
  If your Pelgrim dishwasher leaves spots after washing, it may be because lipstick and tea can be difficult to wash off. Use a detergent with a bleaching agent.
C
craigharrisSep 2, 2025
Why does the control panel of my Pelgrim GVWC270L Dishwasher not react when pressed?
- J
  julie28Sep 2, 2025
  If the control panel of your Pelgrim dishwasher does not react when pressed, wait a moment and try again. The control panel only reacts to use when the door is open. If this doesn't work, clean the control panel with a dry or slightly damp cloth.
E
eric08Sep 2, 2025
What to do if the water softener is leaking salt in my Pelgrim Dishwasher?
- D
  Dawn ClarkSep 2, 2025
  Check that the salt compartment lid is properly tightened.
S
scott18Sep 3, 2025
How to fix F10 error on Pelgrim GVWC270L Dishwasher?
- B
  barryrobertSep 3, 2025
  To fix the F10 error on your Pelgrim dishwasher, unblock the drainage pump.
D
David HendersonSep 4, 2025
How to fix F41 error on Pelgrim GVWC270L?
- R
  Rachel JohnsonSep 4, 2025
  To fix the F41 error on your Pelgrim dishwasher, turn off the water tap and remove the plug from the wall socket.