pellenc EXCELION 2 LH - CHANGING SPEEDS; BOOST MODE

BRUSH CUTTER EXCELION 2 LH
53_154421-A
5.4.2. CHANGING SPEEDS
The tool has 4 working speeds.
1. To increase a speed and gain power, press the
POWER / MENU button (9) as many times as nec-
essary.
Note
The speed selector works as a loop:
1-2-3-4-1-2-3-4 etc.
5.4.3. “BOOST” MODE
The "Boost" mode allows you to instantly obtain the maximum rotational speed for the cutting head used (6600 rpm
for a blade, 6300 rpm for a strimmer wire).
Activating “Boost”
1. Double press the trigger (6).
1. Make sure the screen flashes and displays the
"Boost" function.
The speed is then at its maximum for a period of 10
seconds.
45