PelPro Pellet Stove • 7104-171A • 4/20/18
pelprostoves.com 31
Listing and Code Approvals
Listings and Certications
Mobile Home Approved
This Stove is approved for mobile home
Installations when not installed in a sleeping room and when an outside combustion air inlet is
provided.
• The structural integrity of the mobile home oor, ceiling, and walls must be maintained
• The Stove must be properly grounded to the frame of the mobile home with #8 copper
ground wire, and use only listed double-wall connector pipe
• Outside Air Kit provided with each Stove must be installed in a mobile home installation and
must remain clear of leaves, debris, ice and/or snow. It must be unrestricted while the Stove
is in use to prevent room air starvation which causes smoke spillage.
• The Stove must be secured to the mobile home structure by bolting it to the oor through
holes provided at bottom of your cast legs on your Stove.
WARNING! Asphyxiation Risk.
DO NOT INSTALL IN A SLEEPING ROOM. Your Stove consumes
oxygen in the room.
Note
This installation must conform with local codes.
In the absence of local codes you must comply with ASTM E1509-12 and ULC S627-00 by OMNI Test
Laboratories and (UM) 84-HUD
WARNING!
• It is critical to have a working smoke detector installed in the home of Stove operation.
• Smoke alarms that are properly installed and maintained play a vital role in reducing re deaths and injuries. Having a
working smoke alarm reduces the chance of re related injuries.
• Install at least one carbon monoxide detector on each oor of your home.
Stove Certication
Series PP130-B
Laboratory OMNI Test Laboratories
Safety Report
No.
0135PS041S
Type Solid Fuel Room Stove/Pellet Fuel Burning Type
Standard ASTM E1509-12 and ULC S627-00, Room Stove Pellet
Fuel Burning type and (UM) 84-HUD, Mobile Home
Approved.
Note
This wood stove needs periodic inspection and repair for proper operation. It is against
federal regulations to operate this wood heater in a manner inconsistent with operating
instructions in this manual.