Pelpro PP130-B - Page 98

PelPro Pellet Stove • 7104-171A • 4/20/18
pelprostoves.com26
Troubleshooting
Troubleshooting
Blockage Related
Fire starts but goes out
• Conrm rebox is clean and clear (Zone 1)
- Ensure re pot holes are clear
• Inspect Stove body (Zone 2)
- Conrm exhaust probe is connected
- Inspect and clean the exhaust outlet
• Conrm exhaust path is clean and clear (Zone 3)
Starts and stops frequently in automatic mode
• Determine if your room is experiencing varying temperatures due to repeated opening/
closing of doors or windows—correct if necessary
• Examine Stove body (Zone 2)
- Inspect ambient probe and conrm that at least 2” is exposed outside of Stove
body
Slow or smoky start-up and/or lazy ame
• Conrm exhaust path is clean and clear (Zone 3)
• Examine Stove body (Zone 2)
- Align igniter so it is properly placed and centered
- Review fuel quality (see Pellet Fuel information on page 13)
1
Zone
1
Zone
3
Zone
3
Zone
2
Zone
2
Zone
98 of 112