EasyManua.ls Logo

Pelpro PP150 - Blockage Related

Pelpro PP150
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PelPro Pellet Stove • 8104-171B • 10/21 PelPro Pellet Stove • 8104-171B • 10/21pelprostoves.com pelprostoves.com30
31
Troubleshooting
Troubleshooting
Troubleshooting
Rumbling/whistling noise during operation
Conrm exhaust path is clean and clear (Zone 1 & 3)
- Adjust air/fuel ratio using trim adjustment dial (See page 19 for trim adjustment instructions)
1
Zone
1
Zone
3
Zone
3
Zone
2
Zone
2
Zone
Blockage Related
Black soot on outside of house
Conrm exhaust path is clean and clear (Zone 1 and 3)
- Adjust air/fuel ratio using trim adjustment dial
(See page 19 for trim adjustment instructions)
Ensure termination cap has at least 18” clearance to
reduce the e󰀨ects of soot blow-back on home exterior
(ie. siding)—if not able, refer to page 8 for alternate
installation options
Stove will not light
Conrm rebox is clean and clear (Zone 1)
- Igniter is getting hot (glows orange)
Inspect Stove body (Zone 2)
- Conrm fuel is in hopper, close lid securely
- Remove right side panel to access and conrm vacuum switch is clear and
connected at both ends
- Conrm all exhaust blower connections are secure
- Conrm the feed assembly and motor are clean and clear of debris
Conrm exhaust path is clean and clear (Zone 3)
Troubleshooting
Blockage Related
Fire starts but goes out
Conrm rebox is clean and clear (Zone 1)
- Ensure re pot holes are clear
Inspect Stove body (Zone 2)
- Conrm exhaust probe is connected
- Inspect and clean the exhaust outlet
Conrm exhaust path is clean and clear (Zone 3)
Starts and stops frequently in automatic mode
Determine if your room is experiencing varying temperatures due to repeated opening/closing of doors or
windows—correct if necessary
Examine Stove body (Zone 2)
- Inspect ambient probe and conrm that at least 2” is exposed outside of Stove body
1
Zone
1
Zone
3
Zone
3
Zone
2
Zone
2
Zone
Slow or smoky start-up and/or lazy ame
Conrm exhaust path is clean and clear (Zone 3)
Examine Stove body (Zone 2)
- Align igniter so it is properly placed and centered
- Review fuel quality (see Pellet Fuel information on page 14)

Related product manuals