PT395 Series Detector
Flow Thru Adapter. A machined aluminum assembly with either 1/8” Hose barb
fittings or ¼” Compression fittings. This adapter is designed to use in application for
continuous flow of gas through the sensor head assembly.
Calibration Adapter with Tubing: Also a part of calibration accessories. Used
along with the flow regulator to flow the calibration gas to the sensor. Attached is 6
feet ¼” nylon tubing.
Magnetic Wand: A tool used to initiate the internal magnet sensitive switches for
alarm configuration and to initiate sensor calibration.
Pipe Mount Assembly: Includes hex bolts and stainless steel bracket to mount
the sensor to up to a 2” pipe.
To Next Page
Loading...
