Pendulum CNT-90 - Page 181

Index
!
±1 cycle count error ............................ 4-9
A
AC/DC coupling .................................. 3-3
Allan deviation .................................... 6-3
AM modulated signals ........................ 4-8
Aperture
See Measuring time
Arming
description..................................... 5-5
examples..5-9, 5-10, 5-11, 5-12, 5-13,
5-14
manually........................................ 5-6
stop delay............................. 2-12, 5-3
sync. delay ..................................... 5-7
Attenuator
used to reduce noise..................... 3-7
Auto once ........................................... 3-5
Auto Trig Low Freq ........................... 2-13
Auto trigger.........................3-8, 4-19, 6-4
how to use..................................... 3-8
Averaging .................................. 4-10, 6-2
B
Battery Supply
checking .............................7-13, 7-14
Burst
Frequency (CW)............................4-5
C
Carrier wave frequency AM ................4-8
Carrier wave frequency FM.................4-6
Channel
See Input
Confidence limits.................................6-5
Count error, ±1 cycle...........................4-9
Counting
reciprocal.......................................4-9
CW
AM.................................................4-8
D
DC coupling ........................................3-3
Delay
arming sync...................................5-7
Delayed timebase ...............................5-3
! - D
1