Penguin Computing Arctica 4806XP Series - Port Description

Arctica 4806xp switch Installation Guide Chapter 1 Introduction
6
Indicator light of
QSFP+ port
Green light
always on
The port is under the connection state of 40G.
Amber light
always on
The port is under the connection state of 4x10G.
Wink The port is transmitting data.
Red light al-
ways on
There is fault on the port.
Put out No connection or fail to connect.
1.4.Port Description
Arctica 4806xp provides 48 10Gb SFP+ ports and 6 40Gb QSFP+ ports.
REDSTONE D2060 switch support the following SFP transceivers:
● SFP-SX-L transceiver
● SFP-LX-L transceiver
● SFP-LX-20-L 20 km transceiver
● SFP-LX-40 40 km mid distance transceiver
● SFP-LH-70-L 70 km long distance transceiver
● SFP-LH-120-L 120 km long distance transceiver
● SFP-GT 1000 Base-T SFP interface cards module
Each port description in the following:
Table 1-6 Arctica 4806xp port description
Port mode Spec
RJ-45 port
 10/100/1000Mbps auto negotiation
 MDI/MDI-X cable mode auto negotiation
QSFP+
● 40GBASE-CR4 transceiver
Copper, 7m
● 40GBASE-SR4 transceiver
850nm, MMF, OM3/OM4, 100m
Arctica 4806xp provides 6 QSFP+ ports and supports the QSFP+ cable. It enhances
the flexibility of the network. User can select the cables in the table 1-5 according to the
demand.