PENKO 1020 Series User Manual

1020 Mono Filler
17
15
Empty time
The time it will take to close the release valve. The time will
start when the empty level is reached.
Δ Not used if no release valve is selected
16
Recipe
Select the used recipe.
• Local => use the recipe selected on the device
•
Remote => use the recipe from a remote device (e.g. PLC)
17
Online ticket
Select if a printer ticket must be generated after each filling.
18
Use alibi
memory
Select if a result must be written to the internal alibi memory.
19
Coarse delay
The coarse delay time at the start of dosing.
20
Fine delay
The fine delay time at the start of dosing.
21
Start delay
The delay time before dosing.
22
Start level
Check the level of the weigher at the start of dosing. The level
must be within the minimum and maximum level set in the
recipe.
Δ Not used if out-dosing or release valve is selected
23
Auto start
Automatically start dosing.
Δ Not used if out-dosing or release valve is selected or if start
level is turned off

PENKO 1020 Series Specifications

General

Brand	PENKO
Model	1020 Series
Category	Controller
Language	English