EasyManua.ls Logo

Penner Manufacturing Cascade - Shampooing and Rinsing Safety

Penner Manufacturing Cascade
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
e) Adjust the water temperature by turning the Temperature
Control Knob to the normal bathing range of 95 to 105
degrees Fahrenheit as shown below. Monitor the
temperature by viewing the Fill/Shower Temperature
Readout.
f) While pointing the sprayer into the tub, not onto the
resident, press the Shower Trigger, located on the
sprayer. As a further precaution, always test the
water on the inside of your wrist before turning the
sprayer toward the resident.
g) Repeat the washing and rinsing steps for the body a
second time.
5. To shampoo the resident’s hair, use the following procedure:
a) Wet the resident’s hair with the shower sprayer.
b) Push the Shampoo Pump Plunger (Figure 1) and apply
a small amount of Penner Body Wash and Shampoo to
the wet hair.
Note: Penner Body Wash and Shampoo is a special
formula with lanolin for use with residents who have dry
scalp and/or skin conditions. Penner Body Wash and
Shampoo’s special conditioning formula helps assure that all
residues will be removed quickly and easily, leaving hair
clean, conditioned, and shining.
c) Massage the resident’s head to create lather. Continue
the massage to fully clean the hair and scalp.
d) Rinse with the shower sprayer.
e) Shampoo and rinse a second time if required.