PenRecorderPro HD2 - Page 11

11
setting [0:Time+Logo, 1:Time, 2:Logo, 3:None];
6. Save the changes to the “usercfg.txt” le; then
copy and paste the le into the root/main folder
of the HD2 (DO NOT remove the le from the
“Settings” folder);
7. The next time you record a video, the settings
will take aect;
C. SETTING CURRENT TIME/DATE (MAC &
WINDOWS):
1. Connect your HD2 to the computer while the
HD2 is turned o;
2. the HD2 will automatically connect to your
computer as a removable drive;
3. Open the “Settings” folder, and open the le
named “usercfg.txt”;
4. Locate the line item “DateTime=” and input
your desired date/time;
5. Save the changes to the “usercfg.txt” le; then
copy and paste the le into the root/main folder
of the HD2 (DO NOT remove the le from the
“Settings” folder);
6. The next time you record a video, the setting
will take aect;
**IMPORTANT**
After inputting your desired settings, DO NOT
remove the “usercfg.txt” from the “Settings”
folder. You must copy and paste it into the root
folder. It will disappear from the root folder after
the settings take aect. We have included a le
called “usercfg(backup).txt” in case you lose the
le. We also recommend making a backup copy
and saving it to your computer.