To Next PageTo Next Page
Need help?Do you have a question about the Pentair 255 and is the answer not in the manual?
General| Brand | Pentair |
|---|---|
| Model | 255 |
| Category | Controller |
| Language | English |
Instructions for proper drain line setup, including elevation and air gap requirements.
Details on connecting the overflow line from the regenerant tank to a drain.
Steps for connecting the regenerant line from the tank to the valve, ensuring no air leaks.
Input system size, resin volume, or select 3-cycle filter operation.
Steps to place the water conditioner into operation after initial setup.
Configuring essential settings like time, day, regeneration time, and frequency.
Configuring regeneration on specific days of the week for the 740 model.
Selecting salt settings (High, Standard, Low) for optimal regeneration efficiency.
Understanding system capacity display (740) and adjusting capacity settings (760).
Setting the water hardness in grains per gallon (GPG) for the 760 controller.
