What to do if Pentair FLECK 2750 NXT2 treated water has a bad taste or unusual odor?
If the treated water from your Pentair Controller has a bad taste or an unusual odor, contact your dealer and request disinfection treatment.
What to do if Pentair FLECK 2750 NXT2 Controller water is not softened?
If the water is not softened by your Pentair Controller, contact your local dealer who installed the device.
What to do if there is no salt consumption in Pentair FLECK 2750 NXT2?
If there is no salt consumption with your Pentair Controller, contact your local dealer who installed this device.
General| Brand | Pentair |
|---|---|
| Model | FLECK 2750 NXT2 |
| Category | Controller |
| Language | English |
Parameters related to the initial setup of the water softener system.
Configuration of the water flow and pressure components of the system.
Power and frequency parameters for the system's electrical components.
Parameters for controlling regeneration cycles and timing.
Information on the purpose and target audience of the user guide.
Details of document revisions, dates, authors, and changes.
Identification of the manufacturer and the specific product model.
List of directives, regulations, and technical standards the product complies with.
Statement on warranty conditions and Pentair's responsibilities.
Essential safety instructions, warnings, and precautions for system operation.
Diagram showing the location and components of the device's serial label.
Information on potential risks, safety regulations, and authorized personnel.
Points for operation, electrical safety, and system sanitization.
Key performance data including pressure and flow rate.
Operating limits for humidity, voltage, and temperature.
Identification and visual representation of system components and their placement.
Instructions on how to bypass the system in case of malfunction.
General notes on how to access and perform system programming.
Step-by-step guide to configuring essential system parameters.
Procedure for accessing and viewing system diagnostic information.
Advice on using appropriate salt and maintaining resin lifespan.
Steps for initiating regeneration manually, both delayed and immediate.
Information on error codes and their meanings, including LED indicators.
Requirements for regular system cleaning, maintenance, and documentation.
Procedure for collecting information and contacting support for technical assistance.
To Next Page