Need help?Do you have a question about the Pentair intellichem and is the answer not in the manual?
Key DANGER and WARNING statements regarding installation and use of the controller.
Steps for installing the IntelliChem controller, including mounting and wiring transformer.
Procedures for installing the flow cell, pH/ORP sensors, and plumbing connections.
Connecting the controller to automation systems via AC power and RS-485 communication.
A guide to resolving common operational issues and errors.
Explanations of alarm messages and their likely causes and solutions.
Key DANGER and WARNING statements regarding installation and use of the controller.
Steps for installing the IntelliChem controller, including mounting and wiring transformer.
Procedures for installing the flow cell, pH/ORP sensors, and plumbing connections.
Connecting the controller to automation systems via AC power and RS-485 communication.
A guide to resolving common operational issues and errors.
Explanations of alarm messages and their likely causes and solutions.
General| pH Control | Yes |
|---|---|
| ORP Control | Yes |
| Display | LCD |
| Waterproof Enclosure | Yes |
| Enclosure Rating | NEMA 4X |
| Alarms | Yes |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
| Humidity Range | 0% to 95% non-condensing |
| Communication | RS-485 |
| Outputs | Relays for chemical feed pumps |
| Inputs | Flow sensor |
To Next Page