What to do if the Pentair Controller control valve fails to regenerate?
If your Pentair Controller's control valve isn't regenerating, first check for a power outage and ensure the unit is properly plugged in. Then, try performing a manual regeneration. If the issue persists, it is recommended to contact your local water treatment professional.
Why doesn't the water feel or appear soft with my Pentair FLECK SXT Controller?
If the water doesn't feel or appear soft while using your Pentair Controller, check the salt level in the brine tank. Make sure the salt level is above the water level. If the problem continues, it is recommended to contact your local water treatment professional.
What does Upper Drive Sync mean on my Pentair FLECK SXT Controller?
If your Pentair Controller displays an Upper Drive Sync error, the valve will automatically recover. No action is needed.
What to do if my Pentair FLECK SXT shows a Regen Failure?
To address a Regen Failure on your Pentair Controller, perform a manual regeneration to reset the error code. If the problem continues after that, it is recommended to contact your local water treatment professional.
Describes the general capabilities and functions of the SXT timer.
Instructions for setting the current time on the timer display.
How to schedule a regeneration cycle to occur at a later time.
Procedure to manually trigger a regeneration cycle immediately.
Timer regenerates based on water usage depletion.
Timer regenerates at scheduled time after usage depletion.
Timer regenerates based on a fixed time interval.
Timer regenerates based on a weekly schedule.
How the timer display and operation change during regeneration.
Steps to manually advance the valve through regeneration cycles.
How the timer maintains settings and resumes operation after power loss.
Overview of programming parameters and their options.
Procedures for entering, exiting, and performing resets in programming mode.
Settings for display format, valve type, control type, and tank configuration.
Configuration of unit capacity, feedwater hardness, and reserve volumes.
Settings for day override, regeneration time, and cycle step durations.
Configuration of flow meter type and pulse settings.
List of parameters adjustable via user programming.
Instructions for entering and configuring user settings.
Overview of diagnostic parameters available for viewing.
Instructions for entering, navigating, and exiting diagnostic mode.
Exploded views and parts lists for timer assemblies.
Exploded views and parts lists for various meter types.
Explanation of error codes and procedures for resolving them.
Electrical schematic for the 2510SXT timer model.
Electrical schematic for the 2750SXT/2850SXT timer models.
Electrical schematic for the 9000SXT/9100SXT/9500SXT timer models.
General| Controller Type | Digital |
|---|---|
| Display | LCD |
| Power Supply | 24V |
| Control | Microprocessor |
| Programming | User-programmable |
| Voltage | 24V |
To Next Page
