What to do if the Pentair Controller control valve fails to regenerate?
If your Pentair Controller's control valve isn't regenerating, first check for a power outage and ensure the unit is properly plugged in. Then, try performing a manual regeneration. If the issue persists, it is recommended to contact your local water treatment professional.
Why doesn't the water feel or appear soft with my Pentair FLECK SXT Controller?
If the water doesn't feel or appear soft while using your Pentair Controller, check the salt level in the brine tank. Make sure the salt level is above the water level. If the problem continues, it is recommended to contact your local water treatment professional.
What does Upper Drive Sync mean on my Pentair FLECK SXT Controller?
If your Pentair Controller displays an Upper Drive Sync error, the valve will automatically recover. No action is needed.
What to do if my Pentair FLECK SXT shows a Regen Failure?
To address a Regen Failure on your Pentair Controller, perform a manual regeneration to reset the error code. If the problem continues after that, it is recommended to contact your local water treatment professional.
General| Controller Type | Digital |
|---|---|
| Display | LCD |
| Power Supply | 24V |
| Control | Microprocessor |
| Programming | User-programmable |
| Voltage | 24V |
To Next Page
