Need help?Do you have a question about the Pentair AUTOTROL 255 LOGIX Series and is the answer not in the manual?
General| Model | AUTOTROL 255 LOGIX Series |
|---|---|
| Valve Size | 1 inch |
| Valve Material | Noryl |
| Connection Size | 1 inch |
| Operating Pressure | 25-125 PSI |
| Control Type | Electronic |
| Regeneration Type | Upflow |
| Applications | Water Softening |
Configuration parameters for initial system setup, including installation details, resin type, and tank sizes.
Parameters related to the hydraulic operation of the water softener, such as injector and DLFC sizes.
Electrical specifications for the unit, including voltage, frequency, and power consumption.
Configuration options for regeneration cycles, salt usage, and system capacity.
A logbook for recording maintenance activities, including date, description, and replaced parts.
Information on the purpose and intended use of the user guide and related documentation.
Details regarding the document version, release date, authors, and description.
Information identifying the manufacturer and the specific product model covered by the guide.
List of guidelines, directives, and technical standards the product complies with.
Disclaimer regarding Pentair's warranty and liability for product use and installation.
Guidance on locating and maintaining the serial label and safety tags on the device.
Important safety warnings and precautions to prevent injuries, property damage, or pollution.
Recommendations for maintaining water hygiene and sanitizing the system.
Details on the product's pressure ratings and water temperature operating range.
Information on suitable environmental conditions for operation, including humidity and temperature.
Identification and location of key components of the controller unit.
Instructions on how to bypass the system in case of a problem.
Steps for initial programming, including time setting and day of week selection.
Procedure for setting or adjusting the regeneration time for the system.
How to access and view recorded historical data and system parameters.
Advice on using appropriate salt and considerations for sanitizing processes.
Instructions for initiating immediate or delayed manual regeneration cycles.
Mandatory guidelines for system cleaning, maintenance, and documentation.
Procedure for obtaining technical support and resolving common system issues.
To Next Page