What does error E1 mean on Pentair AUTOTROL 604?
If your Pentair Control Unit displays "E 1", press any button. If "E 1" does not clear, replace the controller, as the program settings have been corrupted.
General| Type | Control Unit |
|---|---|
| Model | AUTOTROL 604 |
| Operating Pressure | 20-125 psi (1.4-8.6 bar) |
| Operating Temperature | 1-49°C |
| Timer Settings | Regeneration time, cycle time |
Explains the purpose of the user guide and details document release information.
Provides manufacturer details, applicable standards, and limitations of liability.
Details safety tag locations, potential hazards, and requirements for qualified personnel.
Covers electrical hazards, handling precautions, and recommended hygiene practices.
Lists technical data like pressure, temperature, and operating environmental parameters.
Identifies device components and explains the system bypassing procedure.
Guides on setting time of day, brine dosage, and regeneration intervals.
Details how to view historical data and provides recommendations for system operation.
Explains how to initiate immediate, delayed, and quick service regeneration cycles.
To Next Page
