Do you have a question about the Pentair Hypro 9910-D252 and is the answer not in the manual?
Model | 9910-D252 |
---|---|
Type | Diaphragm Pump |
Maximum Pump Speed | 550 RPM |
Maximum Fluid Temperature | 140°F |
Outlet Size | 1/2 inch |
Power Source | Electric |
Maximum Flow | 6.5 GPM |
Maximum Pressure | 290 PSI |
Inlet Port | 1/2" NPT |
Outlet Port | 1/2" NPT |
Shaft | Solid |
Horsepower | Not Applicable |
Voltage | Not Applicable |
Phase | Not Applicable |
Material | Stainless Steel |
Inlet Size | 1/2 inch |
Describes the Hypro medium pressure diaphragm pumps and their applications.
Safety notice regarding chemicals in the product and potential health risks.
Details on various shaft adapter and gear reduction drive options for pumps.
Information on available control units for pumps and their capabilities.
Comprehensive safety guidelines, warnings, and precautions for pump operation.
Safety alert for hazardous materials and schedule for routine pump upkeep.
Instructions for pump plumbing, hose selection, and shaft adapter kit installation.
Steps for installing gear reduction kits for various pump models.
Procedures for installing and mounting various control units onto pumps.
Guidance on pump operation, pressure setting, and adjustments for different models.
Routine upkeep, including oil changes, valve, and diaphragm replacement.
Guide to diagnosing and fixing common operational problems.
Technical data on pump performance, including flow rate and pressure ratings.
Information on the product's limited warranty and the process for returns.