14
Table 2. Approximate amount of stabilizer (cyanuric acid) to obtain 40 ppm in pool
Current
Cyanuric Acid
Level - ppm
10,000 g
(38,000 L)
12,000 g
(45,425 L)
14,000 g
(53,000 L)
16,000 g
(60,600 L)
18,000 g
(68,137 L)
20,000 g
(76,000 L)
22,000 g
(83,300 L)
24,000 g
(90,850 L)
26,000 g
98,421 L)
28,000 g
106,000 L)
30,000 g
(134,000 L)
0
3.25 (1.47 kg) 3.90 (1.77 kg) 4.55 (2.6 kg) 5.20 (2.36 kg) 5.85 (2.65 kg) 6.50 (2.94 kg) 7.15 (3.24 kg) 7.80 (3.53 kg) 8.45 (3.83 kg) 9.10 (4.12 kg) 9.75 (4.42 kg)
10
2.43 (1.10 kg) 2.92 (1.32 kg) 3.40 (1.54 kg) 3.89 (1.76 kg) 4.37 (1.98 kg) 4.86 (2.20 kg) 5.35 (2.42 kg) 5.83 (2.64 kg) 6.32 (2.86 kg) 6.80 (3.08 kg) 7.29 (3.30 kg)
20
1.62 (0.73 kg) 1.94 (0.88 kg) 2.27 (1.03 kg) 2.59 (1.17 kg) 2.92 (1.32 kg) 3.24 (1.47 kg) 3.56 (1.61 kg) 3.89 (1.76 kg) 4.21 (1.91 kg) 4.54 (2.05 kg) 4.86 (2.20 kg)
NOTE: The cyanuric acid reading should be maintained at 30 - 50 ppm.
Pool Water Preparation
Determining Pool Size (Gallons of Water in Your Pool)
• Rectangular Pools: Length x width x average depth x 7.5
• Circular Pools: Diameter x diameter x average depth x 5.9
• Oval Pools: Length x width x average depth x 6.7
• Sloping Sides: Multiply total gallons by 0.85 = gallon capacity
Determining Pool Size (liters of water in your pool)
• Rectangular Pools: Length x width (meters) x average depth x 1000
• Circular Pools: Diameter x diameter x average depth x 785
• Oval Pools: Length x width (meters) x average depth x 893
• Sloping Sides: Multiply total liters by 0.85 = liter capacity.
CAUTION - Never use dry acid (sodium bisulfate) to adjust pH in arid geographic areas with excessive
evaporation and minimal dilution of pool water with fresh water. A buildup of byproducts can damage the SCG.
IntelliChlor Salt Chlorine Generator Installation and User’s Guide
To Next Page
Loading...
Need help?
General
