What to do if my Pentair Lighting Equipment has low or no chlorine due to heavy organic load?
If your Pentair Lighting Equipment shows low or no chlorine because of a heavy organic load, rain, leaves, fertilizer, heavy bather load, a recent party, or pets using the pool, activate the 'Boost' mode and let it run for 24 hours. After this period, recheck the chlorine level. If it remains too low, super-chlorinate using an outside source.
Why is the red LOW salt LED on in my Pentair INTELLICHLOR IC15 Lighting Equipment?
The red LOW salt LED illuminates because the pool water needs salt, which stops chlorine production. To resolve this, add salt as described.
How to increase chlorine production in Pentair Lighting Equipment if the sanitizer output is too low?
If your Pentair Lighting Equipment has low chlorine production because the SANITIZER OUTPUT percentage is set too low or off at 0%, increase the SANITIZER OUTPUT by pressing the MORE button.
What to do if Pentair INTELLICHLOR IC15 shows low chlorine because of temperature increases?
If you observe a temporary loss of chlorine in your Pentair Lighting Equipment because of recent increases in weather temperature, increase the SANITIZER OUTPUT by pressing the MORE button.
What to do if my Pentair INTELLICHLOR IC15 has low or no chlorine because of insufficient operating hours?
If your Pentair Lighting Equipment is showing low or no chlorine, it might be due to insufficient operating hours. Increase the SCG operating time per day.
How to fix low chlorine in Pentair INTELLICHLOR IC15 Lighting Equipment with a clogged cell?
If your Pentair Lighting Equipment has low or no chlorine and you suspect a clogged or dirty cell, remove the cell for inspection and clean it if necessary.
What to do if my Pentair INTELLICHLOR IC15 Lighting Equipment has low or no chlorine because of new pool water?
If your Pentair Lighting Equipment shows low or no chlorine with new pool water, super chlorinate the pool.
What to do if my Pentair Lighting Equipment has low or no chlorine because of low stabilizer level?
If your Pentair Lighting Equipment shows low or no chlorine and you have an outdoor pool, it may be due to a low stabilizer (cyanuric acid) level in the pool water. Add cyanuric acid to maintain a level of 30 - 50 PPM.
Explains the control panel functions, buttons, and LED indicators.
Describes the function and connection of the SCG power supply unit.
Covers essential safety warnings for installation and operation.
Emphasizes electrical safety, grounding, and chemical handling precautions.
Explains the LED indicators for pool water salt levels.
Describes dummy cell use and physical installation of the SCG cell.
Guides on connecting the cell power cable to the power center.
Lists common issues, causes, and corrective actions for the SCG.
General| Brand | Pentair |
|---|---|
| Model | INTELLICHLOR IC15 |
| Category | Lighting Equipment |
| Language | English |
To Next Page
