Pentair KREEPY KRAULY LIL SHARK - INSTALLATION STEPS; Preparation of the Pool and Cleaner

1
‘LIL SHARK
™
Aboveground Pool Cleaner Installation and User’s Guide‘LIL SHARK
™
Aboveground Pool Cleaner Installation and User’s Guide
PREPARATION OF THE POOL
STEP 3:
Assemble Cleaner
A. Attach hose sections as shown in Fig. 1.
B. Insert swivel assembly into top of cleaner
body and twist 1/4 turn clockwise to lock.
See Fig. 2.
C. Attach hose assembly to cleaner swivel
assembly.
STEP 4:
Submerge Cleaner
A. Turn cleaner upside down, submerge, and
feed cleaner and hose down side of the pool
wall to fill hose with water. Fig. 3.
STEP 1:
Preparation of the Pool
A. Before operation of cleaner, make the
following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
B. Start Pump.
STEP 2:
Check Parts
A. Make sure you have all parts to pool
cleaner.
Vacuum
Regulator
Swivel
Assembly
Reducer
Cone
Hose
Flow
Director
924 0594
Swivel
Assembly
Male Hose End Female Hose End
Fig. 1.
Fig. 2.
Fig. 3.
ENGLISH