5
‘LIL SHARK
™
Aboveground Pool Cleaner Installation and User’s Guide‘LIL SHARK
™
Aboveground Pool Cleaner Installation and User’s Guide
REPLACEMENT PARTS
‘Lil Shark
™
Aboveground Pool Cleaner Illustrated Parts List
Item
No.
Part No. Part Description
1 GW9012 Swivel Assembly
2 * Pool Cleaner Body (with Bristles)
3 41100-0027 Oscillator Impact Bumper (Pkg of 2)
4 GW9004 Oscillator Seals (Pkg of 2)
5 GW9003 Oscillator Kit (Includes Seals)
6 GW9002 Axle Shaft
7 371514Z Cover Kit
8 371508Z Fin Kit
9 GW9014 Flow Director
- 371526Z Replacement Hose Kit
10 GW9018 Vacuum Regulator
11 GW9015 Reducer Cone
12 GW9019 Unidapt Handle
- Not Shown
Oscillator Removal
To remove Oscillator from cleaner, remove cover/skin by removing 2 screws on bottom of cleaner with phillips head screwdriver.
Tip cleaner on to its side, support side of housing, and tap axle shaft out of body.
Oscillator will now slide out of cleaner body. Oscillator impact bumpers can be pried out of slots in cleaner body (they slide towards
bottom of cleaner). To replace, reverse procedure.
1
7
3
4
5
6
8
2
10 9
11
Unidapt
Handle
Note: Unidapt
handle for
manual cleaning
Vacpole
3094 1097
12
ENGLISH
To Next Page
Loading...
