Pentair KREEPY KRAULY PROWLER 830 - ASSEMBLY AND SET UP; Power Supply Connection

1
PROWLER
®
820 and 830 Installation and User’s Guide
Overview
Prowler
®
820 and 830 Robotic Cleaners are designed to scrub, vacuum,
and filter (including the waterline) your inground pool. Before operating
this product, be sure to read and follow all warning and safety instructions
on pages ii-iii.
Cleaners Include:
On/Off
Switch
Power Supply
Remote Control
OK
Cart
ASSEMBLY AND SET UP
• Cleanerwith55ft.oatingcable
• CaddyandPowerSupply
• Weeklytimerwithfullbagindicator(830model)
• Cycleselectorremotecontrol(830model)
Power Supply
• Connectonlytoagroundingtypereceptacleprotectedbyaground-faultcircuit-interrupter(GFCI).
• Donotuseanextensioncordtoconnecttheunittotheelectricalsupply.Provideaproperlylocatedoutlet.
• Positionthecaddyandthepowersupplyatleast10feet(3m)fromtheedgeofthepoolduringoperation.
• Keeppowersupplyoutofstandingwater
• Useonlytheoriginalpowersupply-Digital,“switchmode”,100-250AC.
GFI/ELI
104ºF Max
40ºC Max