Pentair KREEPY KRAULY PROWLER 830 - Power Supply Features

PROWLER
®
820 and 830 Installation and User’s Guide
4
PROWLER
®
820 and 830 Installation and User’s Guide
Full Filter Bag Indicator
LED 1
LED 2 LED 3
LED 1 - 7x per week - every day
LED 2 - 3x per week - every other day
LED 3 - 2x per week - every 3 days
Turning the Cleaner ON
Whenthepowersupplyisswitchedon,the3LEDswillblinkfor5seconds.Atthistimebypressingthe
SELECTbutton,youmaychooseapoolcleaningscheduleforthecomingweek.
Note: Thecleanerwillalwaysbegintoworkuponset-up.
LED 1 -Thecleanerwillautomaticallyworkeverydayforafullcycle=7timesperweek.
LED 2 -Thecleanerwillautomaticallyworkeveryotherdayforafullcycle=3timesperweek.
LED 3 - Thecleanerwillautomaticallyworkevery3days=2timesaweek.
1. Plugtheoatingcablefromthecleanerintothepowersupplyunit.
2. Plug the electrical cable from the power supply unit into a house receptacle.
3. Assemblethepowersupplyontothecart.
4. PresstheON/OFFswitchonthepowersupplyunit.Thecleanerwillnowstarttowork.
Floating Cable
On/Off Switch
Setting the Weekly Timer (830 Model Only)
Thepowersupplyhasatimercontrolthatallowsyoutosetanautomaticcleaningscheduleeachweek.Besurethe
cleaner is fully immersed in water before turning on the power.
Floating Cable
On/Off Switch
Digital Switch Mode Power Supply
WeeklyTimerandFullFilterBagIndicator
If you do not press any of the buttons within the first
5 seconds after the power has been switched on,
the cleaner will default to running one cycle only.
Whilethecleanerisworkinginweeklytimermode,
theLEDwillblinkconstantlybetweencycles.Atthe
end of the week the power supply automatically
shuts off.
• Input-100-250ACVolts
• 50-60Hertz
• 180Watt
• Output-30VDC
• IP54