Pentair SUDMO P740 - 12 Technical Data; Dimensions

Operating Instructions
Disk type non-return valves
RV Solid series
Type: P740, P741, P745, P750 and P760
DN 010 – 150, OD 0.50” – 6.00”, ISO 008 – 125
18 / 34
Copy of the original operating instructions
BAA RV Solid
en
12. Technical data
12.1. Dimensions
DN Pipe ø øD1 øD2 øD3 øD4 øD5 øD6 øD7 øD8 øG L1 L2 L3 L4 L5 L6
DN 010 13 x 1.5 13.0 10.0 43.0 65.0 34.0 43.0 62.5 43.0 Rd 28 x 1/8" 68.0 64.0 60.0 110.0 88.5 109.0
DN 015 19 x 1.5 19.0 16.0 43.0 65.0 34.0 43.0 62.5 43.0 Rd 34 x 1/8" 52.0 64.0 60.0 110.0 82.5 103.0
DN 020 23 x 1.5 23.0 20.0 43.0 65.0 34.0 43.0 62.5 43.0 Rd 44 x 1/6" 52.0 64.0 60.0 110.0 85.5 109.0
DN 025 29 x 1.5 29.0 26.0 55.0 77.0 50.5 55.0 84.0 55.0 Rd 52 x 1/6" 75.0 75.0 75.0 125.0 103.5 132.0
DN 040 41 x 1.5 41.0 38.0 68.5 92.0 50.5 68.5 96.0 68.5 Rd 65 x 1/6" 80.0 80.0 80.0 130.0 112.5 145.0
DN 050 53 x 1.5 53.0 50.0 85.0 104.0 64.0 85.0 109.0 85.0 Rd 78 x 1/6" 82.5 82.5 82.5 132.5 117.0 151.5
DN 065 70 x 2.0 70.0 66.0 104.0 123.0 91.0 104.0 126.0 104.0 Rd 95 x 1/6" 89.0 89.0 89.0 139.0 128.5 168.0
DN 080 85 x 2.0 85.0 81.0 126.0 130.0 106.0 126.0 141.0 126.0 Rd 110 x 1/4" 99.0 99.0 99.0 149.0 143.5 188.0
DN 100 104 x 2.0 104.0 100.0 153.0 159.0 119.0 153.0 161.0 153.0 Rd 130 x 1/4" 114.0 114.0 114.0 164.0 167.5 221.0
DN 125 129 x 2.0 129.0 125.0 190.0 203.0 155.0 190.0 200.0 190.0 Rd 160 x 1/4" 146.0 146.0 138.0 198.0 191.5 237.0
DN 150 154 x 2.0 154.0 150.0 227.0 241.0 183.0 227.0 230.0 227.0 Rd 190 x 1/4" 162.5 162.5 152.5 212.5 212.0 261.5
Welding end / Welding end
DIN 11866
Sandwich style
Welding end DIN 11866
Welding end / Thread
DIN 11866 / DIN 11851
Thread / Thread
Size in mm