76670 -6/12-
2. DISASSEMBY AND ASSENBLY.
2-1. Caution:
◆ About FW installation and adjustment after replaced T100
The following procedure will be required ( Same as ＊istDS2（76640）)
2-2. Chart for Assemble, Adjustment and Confirmation.
Procedure of Adjustment and confirmation is same as ＊ist DL（76570）
Refer to the ＊ist DL（76570）Service manual
3, Procedure for Disassemble/Assembly
Procedure of Disassemble/Assembly is same as ＊ist DL（76570）
① FW for new T100
② FW for service
Adjustment
To Next Page
