76670 -11/12-
4-6. Procedure for Ending the program soft
Finish the program soft with following procedure
① USB Close
Click “Cl”icon and disconnect the correspond with camera
Confirmation: 「Unconnect」should be display as follow
② Click “end” icon and finish the adjustment program soft
③ Double-click hot plug icon
of the taskbar at the lower right of a desktop, and then follow "safe removal of
hardware." -> "PENTAX USB DISK Device"
④ Turn the power of the camera OFF and remove AC adaptor, USB cable
（Battery cover and temporally bottom cover can be stayed for next adjustment）
5. ADJUSTMENT THE PROGRAM SOFT (Digital part)
5-1 .The procedure is same as 76570 except following adjustment procedure
① When the setting and connecting is ready, start the “SLR MTest.exe” in the CSAdjust folder
② Input Lens ID number
③ When the program soft start, the following screen will be displayed and then wait for 20 seconds
Unconnect
76670
To Next Page
Loading...
Need help?
General
