9
(3) REAR PANEL
No. NAME FUNCTION
1 Keyboard Connector accepts the keyboard supplied by PENTAX.
2 Interface Connector RS-232C serial interface connector.
3 Serial Bus NTSC or PAL Serial Digital Video out connector for a still-frame video image .
4 Control is activated by either the endoscope control buttons (C, V) or the keyboard copy key to
control peripherals.
5 RGB Video Output NTSC or PAL RGB video out connectors, 9-pin D-sub Female connectors.
6 Separated Video Output Y/C video out connector (4-pin S connector)
7 Composite Video Output NTSC or PAL composite video out connector, BNC type connector.
8 Power Input Socket accepts AC power cord.
9 Breaker activates with a red button sticked out when abnormal current flows.
-When the breaker is activated, try to reset first. If the breaker activates
again when the processor is turned ON, do NOT use the processor and return it to
PENTAX.
10
Potential equalization terminal
For safety purposes, this terminal is connected to a potential equalization busbar of the
electrical installation.
11 Rating Plate displays unit model number, serial number and power requirements.
CAUTION
To Next Page
Loading...
