77420 - 68/107 -
⑦If the position is in alignment, below screen will be displayed. When you keep the position, adjustment
will be started automatically.
[Caution] Don’t touch camera or chart during adjustment. If you touch it, readjust is necessary.
⑧When horizontal sensor adjustment is completed,
right screen is displayed.
⑨Replace AF chart (No.2) ( horizontal line) then press [OK]
⑩Align the camera and chart (Up-and –down) then adjust.
⑪When adjustment is completed, OK screen will be displayed as shown in below.
⑫Click [X] button to finish adjusting software.
⑬If adjustment error is displayed, [NG] and error code will be displayed.
Refer to [Table of error code]
Positioning
Chart No.1.
Positioning
Chart No.2.
To Next Page
Loading...
