Pentax K1000 User Manual

LENS MOUNTING
1.
Remove the rear lens and
body mount caps.
2.
Match the red dot ~ on the
camera body with the red dot
@ on the lens. Insert the
lens into the body and turn it
clockwise until the lens locks
with a click .
3.
In the dark, when the red dots
are difficult to see, align the
white plastic bump ~ on the
lens barrel with the lens
release lever
® by touch .
Then
turn and lock as above.
4.
To detach, hold the camera
with your left hand. Depress
the lens release lever ® while
turning the lens counter.
clockwise with you r right
hand.
CAUTION
If you have to put the lens down
without the rear lens cap, place
it only on its front end, never on
the rear.
When changi ng
lenses outdoors
with film in the camera, avoid
direct sunlight.
6-

Pentax K1000 Specifications

General

ISO Range	20-3200
Lens Mount	Pentax K
Shutter Speed	1/1000s to 1s, Bulb
Metering	Center-weighted
Focus	Manual
Flash	Hot shoe