Do you have a question about the Pentax K100D and is the answer not in the manual?
Megapixel | 6.1 MP |
---|---|
Sensor type | CCD |
Interface | USB 2.0 |
Color depth | 8 bit |
Digital SLR | Yes |
Video capability | No |
Camera shutter speed | 1/4000 - 30 s |
Focus | TTL |
Auto focusing (AF) modes | centre weighted auto focus, continuous auto focus, selective auto focus |
Light metering | Centre-weighted, Spot |
ISO sensitivity | 200, 400, 800, 1600, 3200, Auto |
Light exposure modes | aperture priority AE, auto, shutter priority AE |
Compatible memory cards | sd |
Display diagonal | 2.5 \ |
Display resolution (numeric) | 210000 pixels |
Magnification | 0.85X x |
I/O ports | AV - NTSC/PAL |
USB version | 2.0 |
Product color | Black |
Battery type | AA |
Number of batteries supported | 4 |
Flash modes | auto, Flash off, Red-eye reduction |
Scene modes | beach, Candlelight, Children, Close-up (macro), Documents, Museum, Night, Night portrait, Portrait, Sunset, Landscape (scenery) |
Photo effects | black&white, Sepia |
White balance | Cloudy, daylight, flash, Fluorescent, manual, Shade, Tungsten |
Camera shutter type | Electronic |
Depth | 70 mm |
---|---|
Width | 129.5 mm |
Height | 92.5 mm |
Weight | 570 g |
Required equipment and steps for camera digital adjustment.
Procedure for copying and setting up adjustment software on the computer.
Procedure for adjusting the AF joint stroke using calipers.
Steps for adjusting viewfinder focus and parallax using specialized tools.
Procedure for positioning the SI-LED using a DC voltage supply.
Steps for adjusting the position of the viewfinder indication.
Steps to write or update the camera's firmware using an SD card.
Procedure to initialize all EEPROM data, required after certain replacements.
Instructions for copying and setting up the SR adjustment software on a PC.
Step-by-step guide to perform the SR adjustment using the software.
Detailed step-by-step guide for performing the SLR adjustment using the software.
Step-by-step guide to perform the SR Gain adjustment using the software.
Step-by-step guide for performing digital adjustments using the software.
Specific procedure for WDC (White Pixel Defect Compensation) adjustment.
Final steps to perform the shutter speed adjustment using software and a tester.
Procedure for updating firmware using an SD card, including warnings.
Alternative procedure for updating camera firmware using an SD card.