Pentax K100D User Manual

76700 -3/94-
(5) Copy the file of [kb393.bin] from [GM_FW] holder (For service) to SD cards.
[CAUTION] You should use latest firmware whenever creating the SD cards for updating.
* You should distinguish SD card by name label etc.
(6) Copy the file of [fwdc156b.bin] from [ＤＬ_FW] holder (For update) to SD cards
(7) Excute [Set up the VB run time] on next section
3. Set up the VB run time
If your computer is not installed “VisualBasic” software, set up the VB run time is required as follow.
It is not required if the VisualBasic is already installed before (*istDL2)
[Procedure]
① Set the 76700 adjustment program soft into the computer
② Execute the setup.exe in the folder of [vb6run_csx.x.x]
Install will start
* The Execute file and uninstall setting file will be generated
[Caution] The Execute file and setting file is needed when uninstall, therefore please do not delete it.
(To be continued next page)

Pentax K100D Specifications

General

Megapixel	6.1 MP
Sensor type	CCD
Interface	USB 2.0
Color depth	8 bit
Digital SLR	Yes
Video capability	No
Camera shutter speed	1/4000 - 30 s
Focus	TTL
Auto focusing (AF) modes	centre weighted auto focus, continuous auto focus, selective auto focus
Light metering	Centre-weighted, Spot
ISO sensitivity	200, 400, 800, 1600, 3200, Auto
Light exposure modes	aperture priority AE, auto, shutter priority AE
Compatible memory cards	sd
Display diagonal	2.5 \
Display resolution (numeric)	210000 pixels
Magnification	0.85X x
I/O ports	AV - NTSC/PAL
USB version	2.0
Product color	Black
Battery type	AA
Number of batteries supported	4
Flash modes	auto, Flash off, Red-eye reduction
Scene modes	beach, Candlelight, Children, Close-up (macro), Documents, Museum, Night, Night portrait, Portrait, Sunset, Landscape (scenery)
Photo effects	black&white, Sepia
White balance	Cloudy, daylight, flash, Fluorescent, manual, Shade, Tungsten
Camera shutter type	Electronic

Weight and Dimensions

Depth	70 mm
Width	129.5 mm
Height	92.5 mm
Weight	570 g