Pentax K100D User Manual

76700 -79/94-
[Supplement] Dust on the CCD
Cause of dust into the camera. → Dust enters from outside of the camera when changing the lens. Dust stick by
moving mirror or shutter.
According to CCD characteristic the static electricity occurs when taking a picture and so the condition is dust
stick easily. Besides customer can find dust easily by viewing image by
the computer.
It is very difficult to remove dust completely therefore, before cleaning the camera, explain to
customer for cleaning as much as possible.
26-8. Default setting
*This setting is initialized camera as condition of product shipment.
[Required equipment] SD card (for Default setting), AC adaptor
(1) Turn the main SW to OFF and then connect the AC adaptor to the camera.
(2) Insert the SD card (for Default setting) into the camera.
(3) Turn the main SW to ON while the SD card cover is opened. The Default setting will start with
blinking the access lamp.
(4) After COMPLETE… is appeared, turn the main switch to OFF and remove the SD card from
the camera.
(5) [Initial Setting] will be displayed on the LCD monitor when the main SW is turned ON.
26-9. FW version up
Version up latest FW if necessary, Refer to [FW Firmware]
FW Firmware
Checking Firmware Version
1. Checking FW version for customer
(1) Turn the main switch to ON while pressing MENU button. The firmware version for customer
VER: x. x x will be displayed on the LCD monitor for 5 seconds.
1-2. Checking FW version for Service
[Required equipment] SD card x2 (FW version check for [ON] and [OFF])
(1) Turn the main switch to OFF.
(2) Insert the SD card for FW version check [ON]
into the camera.
(3) Turn the main switch to ON while SD card cover is opened. Access lamp will blink for about 3
seconds.
(4) After the access lamp is disappeared, turn the main switch to OFF and remove the SD card
from the camera.
(5) Turn the main switch to ON while pressing MENU button. The detailed firmware version (full
vrsion of CPU, DSP) VER: x. xx. xx. xx will be displayed on the LCD monitor for 5 seconds.
[CAUTION] Cancel the “FW version check” according to the following after confirming the version
of FW.

Pentax K100D Specifications

General

Megapixel	6.1 MP
Sensor type	CCD
Interface	USB 2.0
Color depth	8 bit
Digital SLR	Yes
Video capability	No
Camera shutter speed	1/4000 - 30 s
Focus	TTL
Auto focusing (AF) modes	centre weighted auto focus, continuous auto focus, selective auto focus
Light metering	Centre-weighted, Spot
ISO sensitivity	200, 400, 800, 1600, 3200, Auto
Light exposure modes	aperture priority AE, auto, shutter priority AE
Compatible memory cards	sd
Display diagonal	2.5 \
Display resolution (numeric)	210000 pixels
Magnification	0.85X x
I/O ports	AV - NTSC/PAL
USB version	2.0
Product color	Black
Battery type	AA
Number of batteries supported	4
Flash modes	auto, Flash off, Red-eye reduction
Scene modes	beach, Candlelight, Children, Close-up (macro), Documents, Museum, Night, Night portrait, Portrait, Sunset, Landscape (scenery)
Photo effects	black&white, Sepia
White balance	Cloudy, daylight, flash, Fluorescent, manual, Shade, Tungsten
Camera shutter type	Electronic

Weight and Dimensions

Depth	70 mm
Width	129.5 mm
Height	92.5 mm
Weight	570 g