49
4
Taking Pictures
Taking Pictures
In Program Mode (A), you can set all the functions and take pictures.
1 Press the four-way controller (3) in Capture Mode.
The virtual mode dial is displayed.
2 Press the four-way controller (23) to
select the [Program
A].
3 Press the OK button.
The camera is ready to take a picture.
4 Set the functions you want to use.
See “Setting the Capture Functions” (p.36~p.47) for instructions.
5 Press the shutter release button.
The picture will be taken.
Program Mode
Taking Still Pictures 1 p.22
Shutter release button
OK button
Four-way controller
OK
Program
Ok
To Next Page
Loading...
