Pentax Optio 33L - Automatically Change Capture Conditions (Auto Bracket Mode)

64
Taking Pictures
4
You can automatically take three pictures in a row with different settings
for exposure, saturation, sharpness, and contrast. For exposure and
white balance, the bracket step must be set in advance.
1 Press the four-way controller (3) in Capture Mode.
The virtual mode dial is displayed.
2 Press the four-way controller (23) to select [Auto
Bracket (
l)].
3 Press the four-way controller (5).
The bracket type selection screen is displayed.
4 Press the four-way controller (23) to
select the bracket type.
5 Press the OK button.
The camera is in Bracket Capture Mode.
6 Press the shutter release button.
The pictures are taken in Auto Bracket mode.
Automatically Change Capture Conditions (Auto
Bracket Mode)
• Check the images in Playback mode.
• Setting the Auto Bracket Mode will cancel the Continuous Shooting mode.
• To exit auto bracket capture mode, switch to another mode.
Playing Back Still Pictures
1 p.24
Shutter release button
OK button
Four-way controller
OK
Auto Bracket
Saturation
Ok